Here is the title one h1 placeholder text

Laser cross light source: What is the operational amplifier measure of laser cross light source?

The safe use of professional laser requirements requires all laser technicians, and everyone around the laser must have sufficient understanding of laser safety. Important is the safety of professional lasers. Although it is much weaker than the main light, it is still very strong for human eyes, so it can still cause harm to human eyes. Then the laser cross light source: laser cross light source operational amplifier measures?

Laser cross light source: What is the operational amplifier measure of laser cross light source?

1. Observe all safety precautions in the operating manual.

2. The solvent must be used carefully in the vicinity of the laser.

3. Operation limited to qualified personnel familiar with laser safety.

4. Do not directly look at the laser source or the laser beam scattered from any reflective surface.

5. The experimental setting is kept at a low height to prevent the beam from entering the eye due to negligence.

6. In order to prevent accidental output of the beam or its reflection, the operator should wear suitable laser safety glasses of the specified wavelength.

7. Avoid direct laser, strong beam can easily burn skin or brighten clothes.

8. When using the laser in a sealed chamber, if it is not controlled, the laser is still parallel to the long distance, so there is still a potential danger.

9. Attach a warning sign in the hazardous area of the laser beam to alert all laser users and the laser system to the laser laser hazard level in the vicinity.

Professional laser lights have been engaged in laser R & D and production for more than 20 years, and their product advantages have led the development of the industry. All laser devices have internal locking devices, delayed light, electromagnetic internal locking, scan failure safety, V-RAD 506 mechanical grating | response time is 20ms, and the shadow plate can be adjusted. All basic control settings, such as X and Y axis dimensions, scan fail-safe settings, etc., can be controlled through the constructed port. Equipment scanning system protection, emergency safety brake buttons of multiple laser systems can be connected in series to realize "one click" control operation.

Laser Cross Light Source: Eight Daily Maintenance Contents of Laser Equipment?

Maintenance refers to the protection and repair of things in a normal state. If you want to operate the laser equipment for normal operation, routine maintenance is required. New or old laser equipment is subject to routine maintenance. Proper maintenance is also one of the ways to extend the life of equipment.

Eight daily maintenance items for laser equipment:

1 Please pay attention to cleaning the lens, guide rail and cleaning table; How to clean the lens: When cleaning the lens, you need to use absolute ethanol or 98 alcohol as a cleaning solution. Gently wipe, wipe the lens with dry cotton on the lens to make the lens bright and transparent. (Please note that it is too difficult to clean and cannot wipe off the lens to cause damage to the lens) The cleaning method of the guide rail, add a little cleaning oil to the guide rail, and make the sports guide clearly distributed on the guide rail.

2.(Please be careful not to use thicker lubricating oil (butter). This lubricant can easily cause the distortion of debris and dust on the guide track until the slider and guide rail are worn); ferroalloy, honeycomb, reptile, knife bar and other workbenches, clean up the handling of broken materials on the workbench first. Crawling work table needs to add a little transparent rusty oil for crawlers in half a year. Essential (Please note that the work platform cannot be easily cleaned with water, and it is easy to rust the workbench to accelerate work oxidation. 2 Clean the pump and smoke regularly to keep it clean; how to clean the fan and smoke pipe: when dealing with large ones, you need to clean the fan, remove the outer cover of the fan, and scrape the fan blades and air passages with thin wood chips. Then blow out the accumulation of dust on the top with a high-pressure air gun. The method of cleaning the pipe is the same as that of the pump. (Note: Water cannot be treated in air pipes, and cannot be extended to humid places, such as sewers).

3. Clean the water tank radiator regularly; the cleaning method of the radiator: the main purpose of the radiator is to disperse the heat of the water circulation in the laser tube, and the poor heat dissipation directly affects the laser outlet power. The cleanliness of the radiator is very important. Then use the high-pressure air gun on the water inlet, wash the gas, use the air conditioner radiator to clean the liquid on the radiator, wash with water, use water and dry.

4. Equipment mechanical gearbox parts need to be lubricated once a month; maintenance details of equipment mechanical transmission parts: main oil parts, such as synchronous wheels, bearings, light wheels and light rods. It has done a good job in anti-fruit treatment, connecting the bearing office needs to be added once a month.

5. Circular water needs to be replaced every week; circulating water maintenance rules: circular water is mainly used to heat the laser tube for heat dissipation, which directly affects the laser tube and service life. Round water needs to be used with pure water. The original scale is not easy. When the water is turbid, it needs to be replaced by circulating water. At 3/2 of the water tank, the water injection volume is better. Add water less than 3/1, otherwise the laser tube will break.

6. New laser equipment, laser output power easy to control 80;

7. In order to make the service life of the laser tube longer, it is recommended to work continuously for about 5 hours, and then work for about 10 minutes.

8. Maintenance of the laser tube: The new laser equipment, the laser output power is easy to control below 80, mainly because the new laser tube gas is full, and it is easy to make the gas consumption too fast during high power processing. When working continuously for 5 hours, the main reason is that the long-term operation of the laser tube will cause the temperature of the laser tube to increase the power of the laser tube for a long time.